OB2365P

GENERAL DESCRIPTION

OB2365Pis a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications.

At normal load condition, it operates in QR mode in high line input voltage. To minimize switching loss, the maximum switching frequency in QR mode is internally limited to 77KHz When the loading goes low, it operates in PFM mode with valley switching for high power conversion efficiency. When the load is very small, the IC operates in ‘Extended Burst Mode’ to minimize the standby power loss. Additionally, in the low line input voltage, the IC operates in fixed frequency (65KHz) CCM mode at the heavy loading. As a result, high conversion efficiency can be achieved in the whole loading range.

VCC low startup current and low operating current contribute to a reliable power on startup and low standby design with OB2365P.

OB2365P offers comprehensive protection coverage with auto-recovery including Cycle-by-Cycle current limiting (OCP), VCC under voltage lockout (UVLO) and brownout protection. It also provides the protections with latched shut down including over load protection (OLP),In-chipover temperature protection（In-Chip OTP）,external over temperature protection (OTP), output over voltage protection (OVP) and under voltage protection(UVP). Excellent EMI performance is achieved with On-Bright proprietary frequency shuffling technique.

The tone energy at below 23KHz is minimized in the design and audio noise is eliminated during operation.

OB2365P is offered in SOT23-6 package.

APPLICATIONS

Offline AC/DC flyback converter for

■Power Adapter

FEATURES

■Power on soft start reducing MOSFET Vds stress

■Multi-Mode Operation

120KHz minimum clamping frequency in CCM mode @ Peak Load in low line voltage

77KHz maximum clamping frequency in QR mode @Full Load in high line voltage

65KHz minimum clamping frequency in CCM mode @ Heavy Load in low line voltage

Valley switching operation @ Green mode

Burst Mode @ Light Load & No Load

■Frequency shuffling for EMI

■Extended burst mode control for improved efficiency and low standby power design

■Audio noise free operation

■Comprehensive protection coverage

oVCC Under Voltage Lockout with hysteresis (UVLO)

oVCC Over Voltage Protection (VCC OVP)with latch

oCycle-by-cycle over current threshold setting for constant output power limiting over universal input voltage range

oOver Current Protection (OCP) with latch

oOver Load Protection (OLP) with latch

oOutput Over Voltage Protection(Output OVP) with latch, andthe OVP triggered voltage can be adjusted by the resistors connected between auxiliary winding and ground

oOutput Under Voltage Protection(Output UVP) with latch

oIn-chip over temperature protection（In-Chip OTP）with latch

oAdjust Over Temperature Protection(OTP) through CS pin with latch

oBrownout protection with auto-recovery

oOutput diode short protection with auto-recovery

TYPICAL APPLICATION

map